Important Steps for Installing a New Shower Unit

Important Steps for Installing a New Shower Unit

Blog Article

Request An Appointment

What're your ideas on Simple ways to Install a Shower Cubicle on Your Own?

An effective shower setup requires cautious preparation and a lot of job. Most of the times, you will certainly need to do three sorts of tasks: mounting walls, installing the plumbing, and also completing walls.

Prep work

First of all, you must select the sort of shower that you wish to mount. It is very important to ascertain whether the selected shower can handling certain systems as well as can control a secure degree of water through the boiler. Many shower systems nowadays are designed to be flexible to various water stress (such as stored hot water and cold keys).
It is likewise vital to consider the water pressure and the preparation of the piping and also water drainage for the shower

Various Sorts Of Shower Units

 

• Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be linked to the bathroom faucet according to your requirement, and also the water temperature can be changed by means of the taps. Push-on mixers are cheap and also extremely simple to set up. Nonetheless, although the pipe link is basic, it is easily removed. In addition, it is inconvenient to adjust the temperature level.

 

• Bath/Shower Mixer: The pipe and spray of this kind of shower are combined with a bathroom mixer faucet, and the temperature level can be changed via the bath taps. It is an extremely low-cost alternative and no extra plumbing is entailed. However, the bath/shower mixers additionally suffer from inconvenient temperature control alternatives.

 

• Handbook Mixer: The pipe as well as spray of a hands-on mixer shower system are a part of the wall system and the cold and hot water products are connected to a solitary shutoff The temperature level as well as pressure of the water are regulated via either one or a range of knobs (in extra expensive showers). Although temperature level control is much easier in hands-on mixer kinds, they are extra pricey than the formerly stated mixers. They likewise require additional plumbing of cold and hot supply of water pipelines.

 

• Thermostatic Mixer: The pipe and also spray of this shower type belong of the wall surface unit as well as the hot and cold water supplies are linked to a solitary valve right here also. It is complete with an integrated stabiliser to self-adjust the water temperature level and to avoid it from coming to be too warm. One of the biggest benefits of a thermostatic mixer shower kind includes practical temperature level control. However, it is one of the most costly of the different mixer options.

 

• Power Shower: A power shower is a single device containing a powerful electrical pump that is capable of changing both the water stress as well as temperature. This sort of shower can be fitted if there is supply of water from a cold water cistern and also a hot water cylinder. A power shower makes the modification of both stress and temperature level very easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is supplied by a combination boiler under mains pressure.

 

• Electric Shower: An electrical shower is plumbed into a keys cold water supply and it heats the water electrically. It is essential to note that for this shower kind to be set up, the keys pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and pressure to be changed by means of a handle. Models with temperature stabilisers are better as they stay untouched by other taps elsewhere being used within the house. A major disadvantage of electric showers is that the control handle only permits the option of high temperatures at less pressure, or lower temperature levels at a better stress. This is bothersome in the winter season when the spray is commonly weak and the mains water is cooler. Nonetheless, this issue is dealt with in some designs which are available with a winter/summer setting.

 

Approach

Relying on the kind of shower you want to install, the shower head have to either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Prior to starting, it is suggested to note the positions of the shower head and also control, as well as to plan the pipe-work involved. Furthermore, the water drainage system to eliminate the drainage will certainly need to be planned. Both settings of the cable course and the shower switch will certainly also need to be considered if an instant or electrical shower system is being set up.
Make use of the instruction guide supplied with the shower device to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is very important to remove the supply of water. In order to safeguard the pipelines, they should be offered a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can then be buried right into the wall surface and also plastered over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Link the major shower control to the pipes that will be providing the water (This might need a female screw string adapter).
Reconnect the water supply and test the pipes for any type of leaks, as some might need tightening.
If you are installing an electric shower, keep in mind to turn off the power supply before making any electric links. When these links have been made (there must be guidance within the user's manual), the power supply can be switched over back on.

Changing Water Stress to Match Your Shower

The cold water reservoir can be lifted to a higher height (occasionally just 150mm (6inches)) by fitting a strong wooden support underneath it - perhaps made up of struts and also blockboards. If you select this choice, the primary and also circulation pipelines will certainly additionally have to be raised to meet the new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be attached right into the power supply in order to run.

Piping as well as Drainage

It is best to use 15mm size supply pipelines, as well as make the runs to the shower as brief as well as straight as feasible so regarding maintain maximum pressure and reduce heat loss. Additionally, by minimising making use of elbows for pipeline edges, you can reduce the resistance in the flow of the supply of water. You can accomplish this by flexing the pipes rather.

A Lot Of Usual Blunders

 

• Breaking or neglecting neighborhood code limitations.

 

• Utilizing pipelines that are also tiny.

 

• Connecting copper to galvanized without utilizing a brass or dielectric suitable between both.

 

• Not making use of tape or pipeline compound at threaded joints.

 

• Not leveling your components when mounting them.

 

• Not mounting an air space filling for components.

 

• Reducing supply stub outs as well short to mount the shutoff valves onto after the completed wall surface remains in place.

 

• Not correctly lining up tubes right into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leakage.).

 

• When turning the water back on in your house, constantly run the outside hose pipe shutoff or flush your commodes to bleed dirt and also air from the lines. This particles can cause problems in your sink taps as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.
Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.
You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.
Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.
You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.
You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.
Final Thoughts
Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I hope you liked our article on How to Install a Direct-to-Stud Shower Enclosure. Thanks a lot for taking the time to browse our piece. Sharing is caring. Who knows, you might be helping someone out. Thank you so much for going through it.
Book

Report this page